Alita. Garage Doors. October 13th , 2017.
In response to the inherently dangerous old style garage spring issues as above, a newer and safer system for opening the overhead garage door was created. The idea was to transfer the load or weight of the door via a cable and pulley system to a vertical rod now equipped with a torsion (twisted) spring. This type of spring is installed with specialty hardware and bolts to a fixed plate at one end, while the entire spring is installed around a horizontal pipe. This load balancing device is normally installed directly over the header of the garage opening. Using appropriate cables, connectors and pulleys, the weight of the garage door is transferred into the torsion spring system. The difference between the old style stretched spring and the newer torsion spring is the way that the spring energy is stored. With the old style stretched spring, the energy is stored and released by pulling on the spring or returning the spring to its un-stretched condition.
Saving money by purchasing cheap garage doors really is penny wise and pound foolish as the garage door opening is certainly the weakest point in your homes structure. Thieves routinely target garage doors in their efforts to get into your home. A solid garage door that is tied to your home security system will go a long way to protecting your family and your homes contents. In some cases the security system will email you whenever someone opens or enters your garage. If you have a workshop located in your garage or have a classic care collection then you can be assured that your toys are well protected.
Check out all the Mission Garage Doors and you will find that their products are hard to beat. In addition when it comes to prices you will be surprised just how affordable their products are. Remember to ask about the warranty prior to making any garage door purchase. Different models and features have different warranty coverage. Do your homework well before you make your purchase and you will find the right garage door for your home.
In most installations, a warning tag is left attached adjacent to the torsion spring when the garage door is installed. This tag warns of the danger associated with the stored energy of this spring, and alerts untrained individuals to not attempt any repair, adjustment or to even touch the spring and associated hardware. When the label that should be attached to this spring becomes damaged, is removed or tampered with, it is important that a new warning label be reattached immediately to show the dangers of this spring tension
With a torsion type of spring, the energy is imparted or removed by rotating the spring clockwise or counter clockwise depending upon the direction of usage. With professional installation, the complete loading of the torsion spring is controlled by the garage installer, and is determined by the weight and size of the garage door that it is operating. When this type of torsion spring fails, it remains attached and intact to the location on the horizontal control rod where it was mounted. I have not heard of or seen any torsion spring fly across a garage, creating injury from failed components as with the stretched older style garage door springs. This is not to say that injuries have not occurred with the torsion style spring. The installation of this type of spring is generally safe when left to a trained garage door installation professional. Severe and serious injuries have occurred when untrained, unqualified individuals have attempted to install or service this type of spring.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does CargoCultCraft claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.